English / Russian

Fastening and hardware

  Production   Price list   Order   Delivery





Article
about fastening and hardware



Do know what kinds of nails there are?


Steel welding wire

The feature of steel welding wire according to GOST 2246-70

Steel welding wire is used for welding ( welding deposition) and for making electrodes.

1.Wire size and extreme dimensional inaccuracies:
Steel grade wire size, mm limit deviations by diameter, mm
For welding(welding deposition) for electrodes
08 - 08 0,8 -0,07 -
08 - 08 1,0-1,5 -0,09 -
08 - 08 1,6-2,0 -0,12 -0,06
08 - 08 2,5-3,0 -0,12 -0,06
08 - 08 4,0-6,0 -0,16 -0,12
082 4,0-6,0 -0,16 -0,12

2.Steel chemistry by smelting analysis.
Steel grade mass fraction of elements,%

n

Si

S

Ni

AL

not less than
08
08
082
0,1
0,1
0,05-0,11
0,35-0,6
0,35-0,6
1,8-2,1
0,03
0,03
0,7-0,95
0,04
0,03
0,03
0,04
0,03
0,025
0,15
0,12
0,2
0,3
0,25
0,9-1,2
0,01
0,01
0,01

3. Wire is produced in skeins. The skein consists of one section of wire. Each skein of wire is tied up by soft wire in three places in the circle of skein. The weight of wire skein is: diameter 2,0-6,0 mm in the skeins 100-1000 kg.

4. Wire is transported by all modes of transport in covered transport means with protection from mechanical damages and the entry of moisture, with the observance of rules of freighting, which apply to the relevant mode of transport.




Kamyanske
"Parus-Metiz"

Shyroka Str.,33,
Dniprodzerzhinsk,
Ukraine 51931

phone/fax:
+380 (5692) 3-31-00, 3-25-13
+380 (569) 53-32-43

E-mail:
metiz.utog@ukr.net




       Copyright © 2007 - 2016 Kamyanske "Parus-Metiz"